Fork me on GitHub

source: git/CHANGELOG@ 9e24b7b

ImprovedOutputFile Timing dual_readout llp
Last change on this file since 9e24b7b was 9e24b7b, checked in by Michele Selvaggi <michele.selvaggi@…>, 8 years ago

added CHANGELOG for 3.4.0

  • Property mode set to 100644
File size: 8.5 KB
RevLine 
[6be4bc0]13.4.0:
[9e24b7b]2- corrected granularities for ECAL and HCAL in ATLAS and CMS cards
3- included latest FCC-hh and CEPC detector cards
[6be4bc0]4- improved particle flow algorithm
5- updated FastJet library to 3.2.1
6- updated Nsubjettiness library to 2.2.4
7- added scripts that produce validation plots
8- added DelphesROOT reader
9- added TrackSmearing and BeamSpotFilter modules
10- completed TimeSmearing module
[e121288]11- added preliminary version of vertex clustering algorithm in 3/4D, VertexFinder and VertexFinder4D (special thanks to A. Hart and L. Gray)
[6be4bc0]12- fixed muon efficiency at high energy
13- replaced gaussian smearing with lognormal in MomentumSmearing module
[9e24b7b]14- make pyROOT Example1.py compatible with ROOT
15- included automatic card validation code
[6be4bc0]16
[27a1694]173.3.3:
18- improved compatibility with ROOT >= 6.04
19- removed test of praticle stability based on ROOT pdgtable (#347, #753, #821, #855)
20- fixed bugs in DelphesCMSFWLite
21- fixed bugs in PUPPI
22- fixed compiler and linker flags for Pythia8
23- added CMS Phase II cards
24- added particle gun to DelphesPythia8
25- added jet merging to DelphesPythia8 based on Pythia8 main32.cc
26- added UseMiniCone option in Isolation module
27- added RecoPuFilter module
28- added back OldCalorimeter for CheckMate bwd compatibilty (#591)
29- updated tracking and calorimeter resolution in CMS cards
30
[7c66174]313.3.2:
32- added pre-validated card for CMS upgrade Phase II studies
33- added TrackCountingTauTagging module (a la CheckMate)
34- updated tau-tagging efficiency according to ATL-PHYS-PUB-2015-045
35
[8e2bc10]363.3.1:
37- corrected light parton mistag rate in b-tagging formula for CMS and ILD cards
38- added tracks to output in ILD card to enable root2lhco conversion
39- fixed muon collection in ILD card
40- added example for pileup generation with Pythia8
41- moved to loose isolation working points for ATLAS and CMS cards
[7312b4d]42- added UseRhoCorrection switch to decide which isolation variable use for selection (true by default)
[8e2bc10]43- switch to Rapidity selector (SelectorRapRange) for pile-up density computation in FastJet to ensure backward compatibility
44- addressed N-subjettiness warnings in 2.2.1 version
45
[0ff1a44]463.3.0:
[019a198]47- improved energy-flow algorithm for high momentum
48- updated b-tagging parameterisations to recent ATLAS and CMS publications
[973b92a]49- updated FastJet library to 3.1.3
50- updated Nsubjettiness library to 2.2.1
[d4482ce]51- added a detector card for the ILD detector (for ILC) based on http://arxiv.org/abs/1306.6329
[1fd8862]52- adapted examples, EventDisplay, DelphesFormula and DelphesTF2 to ROOT 6.04
53- fixed tau-tagging for events without tau (thanks to Sho Iwamoto)
[019a198]54- fixed UniqueObjectFinder (#728)
55- added JetFakeParticle module
[c627b07]56- added PhotonConversions module
[1fd8862]57- added TaggingParticlesSkimmer module
[ab24890]58- added phi and energy dependence to AngularSmearing, BTagging, Efficiency, EnergyScale, EnergySmearing, IdentificationMap, ImpactParameterSmearing and MomentumSmearing
[1bc87da]59- added IsRecoPU flag and PTMin parameter to TrackPileUpSubtractor
60- added Invert and Status options to PdgCodeFilter (thanks to Chase Shimmin)
[1fd8862]61- added new isolation variables to Candidate, Electron, Muon and Photon classes (thanks to Raffaele Gerosa)
[0ff1a44]62- added code from CMS to PileUpMerger and PileUpMergerPythia8
[1fd8862]63- added timing information to Calorimeter
64- added new PileUpJetID version (thanks to Seth Senz)
[0ff1a44]65- added Area 4-vector to jet class
66- added PUPPI algorithm and RunPUPPI module
67- added RecursiveTools package from fastjet contribs
68- replaced N-subjettiness with an array in Jet class (same as in Candidate class)
[1fd8862]69- added Trimming, Pruning and SoftDrop to FastJetFinder
[0ff1a44]70- added possibility to use DelphesPythia8 with LHE files
71- added Pythia8 examples
[0bbf248]72- added JetFlavorAssociation module with Physics and Algorithmic definitions of the jet flavor
[ab24890]73- added new jet flavor definitions to the BTagging module (available only when running DelphesPythia8 with LHE files)
[0ff1a44]74
[0c871e5]753.2.0:
[dca96ee]76- moved code repository to GitHub (http://github.com/delphes/delphes)
77- moved configuration files from examples to cards directory
78- new event display, with automatic discovery of the object collections, navigation controls, and 3D geometry sketch (for more details, see WorkBook/EventDisplay)
79- updated FastJet library to 3.1.0
80- added zero suppression to Calorimeter and SimpleCalorimeter modules
81- added SmearTowerCenter configuration parameter to Calorimeter and SimpleCalorimeter modules (#363)
82- added FastJetGridMedianEstimator module (provides much faster pile-up subtraction based on a fixed grid eta-dependent average pile-up density computation)
83- added AngularSmearing module (to smear track eta,phi)
84- added PdgCodeFilter (to veto particle with given PID from collections)
85- added IdentificationMap (allows to apply (mis)-identification)
86- added Example4.C (provides an example on how to compute the jet energy scale)
87- added examples (examples/ExternalFastJet) on how to run Delphes as a library with external FastJet installation
88- updated card for FCC studies (cards/delphes_card_FCC_basic.tcl)
89- added card for LHCb studies (cards/delphes_card_LHCb.tcl)
90- made interface with Pythia 8 turned off by default
91- adapted Isolation module to new energy-flow photons and neutral hadrons (#362)
92- fixed jet mass calculation for anti-kt with "winner-take-all" (#355)
93- fixed crashing of root2lhco when ROOT file doesn't contain all required branches (#340)
94- added possibility to build Delphes with CMake (#313)
[0c871e5]95
[fb8932a]963.1.2:
[dca96ee]97- fixed smearing of (z,t) vertex distribution in the PileUpMerger module
[fb8932a]98
[33689ef]993.1.1:
[dca96ee]100- adapted DelphesSTDHEP to the latest version of the STDHEP format introduced in MadGraph5_aMC@NLO 2.1.2
[33689ef]101
[7e4da42]1023.1.0:
103 added Hector module (fast simulator for the transport of particles in beam lines)
[dca96ee]104- added N-subjettiness and N-jettiness (to identify boosted hadronically-decaying objects like electroweak bosons and top quarks)
105- added SimpleCalorimeter module (to study effects of different granularity in ECAL and HCAL)
106- added ImpactParameterSmearing (to smear transverse and longitudinal track impact parameter needed for track counting b-tagging)
107- added TrackCountingBTagging module (for simple b-tagging algorithm based on counting tracks with large impact parameter)
108- added basic card for FCC studies (examples/delphes_card_FCC_basic.tcl)
[7e4da42]109
[1150871]1103.0.12:
[dca96ee]111- updated FastJet library to 3.0.6
112- added smearing of (z,t) vertex distribution in the PileUpMerger module
113- propagation time computed for every output collection
114- added TimeSmearing module (for propagation time measurement)
115- added PileUpJetId module (thanks to Seth Senz)
[1150871]116
[0d800ef]1173.0.11:
[dca96ee]118- new energy-flow algorithm, optimized for better compatibility with pile-up subtraction
119- added possibility of computing pile-up density in different eta regions via the RhoEtaRange parameter in FastJetFinder module
120- implemented correct efficiency/resolution for high pt muons in CMS cards
121- removed pile-up subtraction on missing energy
122- added possibility to read re-weighting information from LHEF input files
123- added UsePTSum and PTSumMax parameters to isolation module
124- added possibility of specifying the shape of pile-up distribution (via the PileUpDistribution parameter in the PileUpMerger module)
125- added pile-up Vertex collection to the output tree
[0d800ef]126
[0a0a5ef]1273.0.10:
[dca96ee]128- new readers (DelphesProMC.cpp, DelphesProMC.py (#220), DelphesPythia8)
129- new modules (EnergyScale, PileUpMergerPythia8, Weighter)
130- new module parameters (absolute/relative isolation (#187), flat/poisson pile-up distribution)
131- new global parameters (max number of events, skip events (#183), random seed (#202))
132- new branches (pile-up event density rho, MC event weight)
133- updated CMS and ALTAS detector cards (and added ATLAS pile-up detector card)
134- calorimeter smearing is now performed according to a logNormal distribution
135- improved particle-flow algorithm (#204)
136- added calculation of particle propagation time in the tracker
137- fixed tau-jet matching by only considering visible hadronic tau (#208)
138- read masses from MC event file (#195, #201)
139- bug fixes in DelphesCMSFWLite (#196)
140- compilable analysis macro examples (#182)
141- ability to read MC re-weighting information from LHE files
[8560904]142
1433.0.9:
[dca96ee]144- fixed reading of weighted STDHEP events (#181)
145- fixed script building Delphes with CMSFWLite (#180)
146- added more particles to StatusPidFilter (#179)
[8560904]147
1483.0.8:
[dca96ee]149- fixed treatment of units in HepMC format (#175)
150- added Weight to HepMCEvent branch to store the event weight (#173)
151- added Rho branch to store the rho energy density (#176)
152- added random rotation of pile-up events around the z-axis
[8560904]153
1543.0.7:
[dca96ee]155- added separate make rule for the event display to fix the compilation problem for systems without OpenGL libraries (#168, #127)
156- added Cloner module
157- modified BTagging module (several BTagging bits can be stored for the same jet collection, see here)
Note: See TracBrowser for help on using the repository browser.