source: trunk/MultiChannelUSB/analyser.v@ 107

module analyser
        (
                input   wire                    clock, frame, reset,
                input   wire    [24:0]  cfg_data,
                input   wire    [1:0]   uwt_flag,
                input   wire    [11:0]  uwt_data,
                output  wire                    ana_dead,
                output  wire                    ana_good,
                output  wire    [11:0]  ana_data,
                output  wire    [11:0]  ana_base
        );

        reg             [2:0]   state_reg, state_next;
        reg             [4:0]   counter_reg, counter_next;
        reg                             dead_reg, dead_next;
        reg                             good_reg, good_next;
        reg             [11:0]  data_reg, data_next;

        reg             [19:0]  sample_reg, sample_next;

        reg             [19:0]  buffer_reg [31:0];
        reg             [19:0]  buffer_next [31:0];

        wire    [11:0]  baseline = buffer_reg[31][16:5];
        wire                    counter_max = (&counter_reg);

        integer i;

        always @(posedge clock)
        begin
                if (reset)
                begin
                        state_reg <= 3'd0;
                        counter_reg <= 5'd0;
                        sample_reg = 20'd0;
                        dead_reg <= 1'b0;
                        good_reg <= 1'b0;
                        data_reg <= 12'd0;

                        for (i = 0; i <= 31; i = i + 1)
                        begin
                                buffer_reg[i] <= 20'hfffff;
                        end
                end
                else
                begin
                        state_reg <= state_next;
                        counter_reg <= counter_next;
                        sample_reg <= sample_next;
                        dead_reg <= dead_next;
                        good_reg <= good_next;
                        data_reg <= data_next;

                        for (i = 0; i <= 31; i = i + 1)
                        begin
                                buffer_reg[i] <= buffer_next[i];
                        end
                end
        end
        
        always @*
        begin
                state_next = state_reg;
                counter_next = counter_reg;
                sample_next = sample_reg;
                dead_next = dead_reg;
                good_next = good_reg;
                data_next = data_reg;
                
                for (i = 0; i <= 31; i = i + 1)
                begin
                        buffer_next[i] = buffer_reg[i];
                end

                case (state_reg)
                        0: // skip first 32 samples
                        begin
                                if (frame)
                                begin
                                        counter_next = counter_reg + 5'd1;
                                        if (counter_max)
                                        begin
                                                state_next = 3'd1;
                                        end
                end
                        end

                        1: // skip first 32 baseline samples
                        begin
                                if (frame)
                                begin
                                        for (i = 0; i < 31; i = i + 1)
                                        begin
                                                buffer_next[i+1] = buffer_reg[i] + {8'd0, uwt_data};
                                        end
                                        buffer_next[0] = {8'd0, uwt_data};

                                        counter_next = counter_reg + 5'd1;
                                        if (counter_max)
                                        begin
                                                state_next = 3'd2;
                                        end
                end
                        end

                        2:
                        begin
                                if (frame)
                                begin

                                        if (cfg_data[24])
                                        begin
                                                if (uwt_data > baseline)
                                                begin
                                                        data_next = uwt_data - baseline;
                                                end
                                                else
                                                begin
                                                        data_next = 12'd0;
                                                end
                                        end
                                        else
                                        begin
                                                if (uwt_data > cfg_data[23:12])
                                                begin
                                                        data_next = uwt_data - cfg_data[23:12];
                                                end
                                                else
                                                begin
                                                        data_next = 12'd0;
                                                end
                                        end
        
                                        sample_next = {8'd0, uwt_data};

                                        dead_next = 1'b1;
                                        good_next = 1'b0;

                                        state_next = 3'd3;
                                end
                        end
                        
                        3:
                        begin

                                // if (sample - baseline < threshold)
                                if (data_reg < cfg_data[11:0])
                                begin
                                        for (i = 0; i < 31; i = i + 1)
                                        begin
                                                buffer_next[i+1] = buffer_reg[i] + sample_reg;
                                        end
                                        buffer_next[0] = sample_reg;
                                        dead_next = 1'b0;
                                end

                                state_next = 3'd2;

                                // skip 32 samples after peak
                                if (counter_max)
                                begin
                                        if (uwt_flag[0])
                                        begin
                                                counter_next = 5'd0;
                                                state_next = 3'd4;
                                        end
                                end
                                else
                                begin
                                        counter_next = counter_reg + 5'd1;
                                end     
                        end

                        4:
                        begin
                                good_next = dead_reg;
                                state_next = 2'd2;
                        end
                endcase
        end

        assign ana_dead = dead_reg;
        assign ana_good = good_reg;
        assign ana_data = data_reg;
        assign ana_base = baseline;

endmodule