Fork me on GitHub

source: svn/trunk/data/DetectorCard.dat@ 398

Last change on this file since 398 was 396, checked in by Xavier Rouby, 16 years ago

added parameters for Roman pots

File size: 6.4 KB
RevLine 
[302]1DETECTOR CARD # DO NOT REMOVE THIS IS A TAG!
2
3# Detector extension, in pseudorapidity units
4CEN_max_tracker 2.5 // Maximum tracker coverage
5CEN_max_calo_cen 3.0 // central calorimeter coverage
6CEN_max_calo_fwd 5.0 // forward calorimeter pseudorapidity coverage
7CEN_max_mu 2.4 // muon chambers pseudorapidity coverage
8
9# Energy resolution for electron/photon
10# \sigma/E = C + N/E + S/\sqrt{E}, E in GeV
11ELG_Scen 0.05 // S term for central ECAL
12ELG_Ncen 0.25 // N term for central ECAL
[303]13ELG_Ccen 0.005 // C term for central ECAL
14ELG_Sfwd 2.084 // S term for FCAL
15ELG_Nfwd 0.0 // N term for FCAL
16ELG_Cfwd 0.107 // C term for FCAL
[374]17ELG_Szdc 0.70 // S term for ZDC
18ELG_Nzdc 0.0 // N term for ZDC
19ELG_Czdc 0.08 // C term for ZDC
[302]20
21# Energy resolution for hadrons in ecal/hcal/hf
22# \sigma/E = C + N/E + S/\sqrt{E}, E in GeV
[303]23HAD_Shcal 1.5 // S term for central HCAL
[302]24HAD_Nhcal 0. // N term for central HCAL
25HAD_Chcal 0.05 // C term for central HCAL
[303]26HAD_Shf 2.7 // S term for FCAL
27HAD_Nhf 0. // N term for FCAL
28HAD_Chf 0.13 // C term for FCAL
[374]29HAD_Szdc 1.38 // S term for ZDC
30HAD_Nzdc 0. // N term for ZDC
31HAD_Czdc 0.13 // C term for ZDC
[302]32
[374]33# Time resolution for ZDC/RP220/RP420
34ZDC_T_resolution 0 // in s
35RP220_T_resolution 0 // in s
36RP420_T_resolution 0 // in s
37
[302]38# Muon smearing
39MU_SmearPt 0.01 // transverse momentum Pt in GeV
40
41# Tracking efficiencies
42TRACK_ptmin 0.0 // minimal pt needed to reach the calorimeter in GeV
43TRACK_eff 100 // efficiency associated to the tracking (%)
44
45# Calorimetric towers
46TOWER_number 40
47TOWER_eta_edges 0. 0.087 0.174 0.261 0.348 0.435 0.522 0.609 0.696 0.783 0.870 0.957 1.044 1.131 1.218 1.305 1.392 1.479 1.566 1.653 1.740 1.830 1.930 2.043 2.172 2.322 2.500 2.650 2.868 2.950 3.125 3.300 3.475 3.650 3.825 4.000 4.175 4.350 4.525 4.700 5.000
48## list of the edges of each tower in eta for eta>0 assuming a symmetric detector in eta<0
49### the list starts with the lower edge of the most central tower
50### the list ends with the higher edged of the most forward tower
51### there should be NTOWER+1 values
52TOWER_dphi 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 20 20
53### list of the tower size in phi (in degrees), assuming that all towers are similar in phi for a given eta value
54### the list starts with the phi-size of the most central tower (eta=0)
55### the list ends with the phi-size of the most forward tower
56### there should be NTOWER values
57##
58#
59
[374]60# Thresholds for reconstructed objects, Pt in GeV
[303]61PTCUT_elec 10.0
62PTCUT_muon 10.0
63PTCUT_jet 20.0
64PTCUT_gamma 10.0
65PTCUT_taujet 10.0
[302]66
[374]67# Thresholds for reconstructed objects in ZDC, E in GeV
68ZDC_gamma_E 20
69ZDC_n_E 50
70
[322]71# Charged lepton isolation. Pt and Et in GeV
[305]72ISOL_PT 2.0 //minimal pt of tracks for isolation criteria
73ISOL_Cone 0.5 //Cone for isolation criteria
[322]74ISOL_Calo_ET 2.0 //minimal tower transverse energy for isolation criteria. 1E99 means "off"
75ISOL_Calo_Grid 3 //Grid size (N x N) for calorimetric isolation
[305]76
[302]77# General jet variable
78JET_coneradius 0.7 // generic jet radius ; not for tau's !!!
79JET_jetalgo 1 // 1 for Cone algorithm, 2 for MidPoint algorithm, 3 for SIScone algorithm, 4 for kt algorithm
80JET_seed 1.0 // minimum seed to start jet reconstruction, in GeV
[383]81JET_Eflow 1 // Perfect energy assumed in the tracker coverage
[302]82
83# Tagging definition
84BTAG_b 40 // b-tag efficiency (%)
85BTAG_mistag_c 10 // mistagging (%)
86BTAG_mistag_l 1 // mistagging (%)
87
88# FLAGS
[303]89FLAG_bfield 1 //1 to run the bfield propagation else 0
[302]90FLAG_vfd 1 //1 to run the very forward detectors else 0
[306]91FLAG_RP 1 //1 to run the very forward detectors else 0
[302]92FLAG_trigger 1 //1 to run the trigger selection else 0
93FLAG_frog 1 //1 to run the FROG event display
[307]94FLAG_lhco 1 //1 to run the LHCO
[302]95
96# In case BField propagation allowed
97TRACK_radius 129 //radius of the BField coverage, in cm
98TRACK_length 300 //length of the BField coverage, in cm
[303]99TRACK_bfield_x 0 //X component of the BField, in T
100TRACK_bfield_y 0 //Y component of the BField, in T
[322]101TRACK_bfield_z 400 //Z component of the BField, in T
[302]102
103# Very forward detector extension, in pseudorapidity
104# if allowed
105VFD_min_calo_vfd 5.2 // very forward calorimeter (if any) like CASTOR
106VFD_max_calo_vfd 6.6
107VFD_min_zdc 8.3 // zero-degree neutral calorimeter
108VFD_s_zdc 140 // distance of the Zero Degree Calorimeter, from the IP, in [m]
109
[330]110#Hector parameters
[302]111RP_220_s 220 // distance of the RP to the IP, in meters
112RP_220_x 0.002 // distance of the RP to the beam, in meters
113RP_420_s 420 // distance of the RP to the IP, in meters
114RP_420_x 0.004 // distance of the RP to the beam, in meters
[330]115RP_beam1Card data/LHCB1IR5_v6.500.tfs // beam optics file, beam 1
116RP_beam2Card data/LHCB2IR5_v6.500.tfs // beam optics file, beam 2
117RP_IP_name IP5 // tag for IP in Hector ; 'IP1' for ATLAS
[396]118RP_offsetEl_x 0.097 // separation between both beam, in meters
119RP_offsetEl_s 120 // distance of beam separation point, from IP
120RP_cross_x -500 // IP offset in horizontal plane, in micrometers
121RP_cross_y 0 // IP offset in vertical plane, in micrometers
122RP_cross_ang_x 142.5 // half-crossing angle in horizontal plane, in microrad
123RP_cross_ang_y 0 // half-crossing angle in vertical plane, in microrad
[302]124
125# In case FROG event display allowed
126NEvents_Frog 100
127
[380]128# input PDG tables
129PdgTableFilename data/particle.tbl // table with particle pid,mass,charge,...
130
Note: See TracBrowser for help on using the repository browser.