wiki:Reweight

Context Navigation

Version 4 (modified by Olivier Mattelaer, 11 years ago) ( diff )
--

Description of the method

The method consist to use a sample of events (weighted or unweighted events) and associate to those events a new weight corresponding to a new theoretical hypothesis. This weight can be propagate through the all simulation chain in order to avoid to have to perform the full-simulation on a huge number of sample. This methods works only if the original hypothesis and the new one are both significant in the same part of the phase-space. the new weight is given by $$W_{new} = |M_{new}|^{2 /|M_{old}|}2 * W_{old} $$

Technical details

Limitation

The two theoretical hypothesis should differ ONLY by difference in the model parameters. So this should be the same process, the same model and the same pdf.
The scale choice for the reweighting is done events by events and is given by the value in the LHE file. The same scale is used for both Hypothesis
In presence of decay chain the order of the particle in the events file is important. This is important if you want to use this tools with LHE events not produced by MadGraph/MadEvent.

How to get the code

The code is currently (30/06/13) in beta, and is still expect to be modify before the official release (especially on the interface). In order to download the code, you need to have bazaar install on your computer. Then you can download the code via the command

bzr branch lp:~maddevelopers/madgraph5/reweight_module After that in order to update your version. You only need to do: bzr pull

How to use the code.

go to the process directory.
launch the ./bin/madevent script
type reweight RUN_NAME
then you will see the following question:
```
Do you want to edit one cards (press enter to bypass editing)?
  1 / reweight  : reweight_card.dat
 you can also
   - enter the path to a valid card.
 [0, done, 1, reweight, enter path][60s to answer]
```
If you didn't define the content of this file already. You need to do it. The syntax is explained inside the file, and you can see example below (validation section). The important point, is that the first line should be launch, and then you specify which parameter, you want to modify. This is the exact same syntax has for scripting a scan over parameter.
exit the file and you are done (the script will run).

If the file Cards/reweight_card.dat is already defined, you can launch the script with

./bin/madevent reweight RUN_NAME -f

The -f options prevent the question to be asked.

Input/Output format

the output format follows the Leshouches agreement (not yet published): http://phystev.in2p3.fr/wiki/2013:groups:tools_lheextension#the_proposal

as an example the header looks like:

<initrwgt>
<weightgroup type='mg_reweighting'>
<weight id='mg_reweight_1'>set param_card dim6 1 100.0
</weight>
<weight id='mg_reweight_2'>set param_card dim6 2 100.0
</weight>
<weight id='mg_reweight_3'>set param_card dim6 3 100.0
</weight>
</weightgroup>
</initrwgt>

and one associated events:

<event>
 8      0 +7.9887000e-06 1.24664300e+02 7.95774700e-02 1.23856500e-01
        1 -1    0    0  501    0 +0.0000000e+00 +0.0000000e+00 +1.3023196e+03 1.30231957e+03 0.00000000e+00 0.0000e+00 -1.0000e+00
       -2 -1    0    0    0  501 +0.0000000e+00 +0.0000000e+00 -1.4499581e+02 1.44995814e+02 0.00000000e+00 0.0000e+00 1.0000e+00
      -24  2    1    2    0    0 -1.2793809e+01 -8.3954553e+01 -1.1792566e+02 1.65987064e+02 8.02071978e+01 0.0000e+00 0.0000e+00
       23  2    1    2    0    0 +1.2793809e+01 +8.3954553e+01 +1.2752494e+03 1.28132832e+03 9.12640692e+01 0.0000e+00 0.0000e+00
       11  1    3    3    0    0 -1.2462673e+01 +1.3647422e+01 -2.6083861e+01 3.19677669e+01 0.00000000e+00 0.0000e+00 -1.0000e+00
      -12  1    3    3    0    0 -3.3113586e-01 -9.7601975e+01 -9.1841804e+01 1.34019297e+02 0.00000000e+00 0.0000e+00 1.0000e+00
        4  1    4    4  502    0 -1.8321803e+01 +9.0929609e+01 +9.3905973e+02 9.43629724e+02 0.00000000e+00 0.0000e+00 -1.0000e+00
       -4  1    4    4    0  502 +3.1115612e+01 -6.9750557e+00 +3.3618969e+02 3.37698598e+02 0.00000000e+00 0.0000e+00 1.0000e+00
<rwgt>
<wgt id='mg_reweight_1'> 4.55278761371e-06 </wgt>
<wgt id='mg_reweight_2'> 2.65941887458e-06 </wgt>
<wgt id='mg_reweight_3'> 8.68203803896e-06 </wgt>
</rwgt>
</event>

The reweight_card in that case was:

launch
   set Dim6 1 100
   set Dim6 2 0
   set Dim6 3 0
   set Dim6 4 0
   set Dim6 5 0
launch
   set Dim6 1 0
   set Dim6 2 100
   set Dim6 3 0
   set Dim6 4 0
   set Dim6 5 0
launch
   set Dim6 1 0
   set Dim6 2 0
   set Dim6 3 100
   set Dim6 4 0
   set Dim6 5 0

Note:

The production events were in this case made via the SM where all those coefficient were in fact set to zero. Therefore all the line setting the line to zero were superfluous, and this is the reason why they didn't appear in the banner.
You can also specify a path to a param_card in the reweight_card. The content of the header being computed automatically with the difference of the two param_card.

The cross-section of the original file and those associated with the new hyppothesis are printed at the end of the script:

INFO: Original cross-section: 0.80086112072 +- 0.0025669959099 pb 
INFO: Computed cross-section: 
INFO: 119 : 5.0238030968 
INFO: 120 : 4.46724081967 
INFO: 121 : 0.790019392142

An example of the full log is:

************************************************************
*                                                          *
*           W E L C O M E  to  M A D G R A P H  5          *
*                      M A D E V E N T                     *
*                                                          *
*                 *                       *                *
*                   *        * *        *                  *
*                     * * * * 5 * * * *                    *
*                   *        * *        *                  *
*                 *                       *                *
*                                                          *
*         VERSION 2.0.0.beta3           2013-02-14         *
*                                                          *
*    The MadGraph Development Team - Please visit us at    *
*    https://server06.fynu.ucl.ac.be/projects/madgraph     *
*                                                          *
*               Type 'help' for in-line help.              *
*                                                          *
************************************************************
INFO: load configuration from /Users/omatt/.mg5/mg5_configuration.txt  
INFO: load configuration from /Users/omatt/Documents/eclipse/reweight_module/PROC_sm_11/Cards/me5_configuration.txt  
INFO: load configuration from /Users/omatt/Documents/eclipse/reweight_module/input/mg5_configuration.txt  
INFO: load configuration from /Users/omatt/Documents/eclipse/reweight_module/PROC_sm_11/Cards/me5_configuration.txt  
MGME5>reweight run_01
Do you want to edit one cards (press enter to bypass editing)?
  1 / reweight  : reweight_card.dat
 you can also
   - enter the path to a valid card.
 [0, done, 1, reweight, enter path][60s to answer] 
>1
open /Users/omatt/Documents/eclipse/reweight_module/PROC_sm_11/Cards/reweight_card.dat
Do you want to edit one cards (press enter to bypass editing)?
  1 / reweight  : reweight_card.dat
 you can also
   - enter the path to a valid card.
 [0, done, 1, reweight, enter path] 
>
INFO: Extracting the banner ... 
INFO: process: p p > e+ e- 
INFO: options:  
INFO: Running Reweight 
launch
INFO: detected model: sm. Loading... 
INFO: generating the square matrix element for reweighting 
INFO: generate p p > e+ e- ; 
INFO: Done 1.197 
set aewm1 100
INFO: modify param_card information BLOCK sminputs with id (1,) set to 100.0 
Do you want to edit one cards (press enter to bypass editing)?
  1 / param     : param_card.dat
  9 / plot      : plot_card.dat
 you can also
   - enter the path to a valid card or banner.
   - use the 'set' command to modify a parameter directly.
     The set option works only for param_card and run_card.
     Type 'help set' for more information on this command.
 [0, done, 1, param, 9, plot, enter path]
The answer to the previous question is not set in your input file
Use 0 value
INFO: starts to compute weight for events with the following modification to the param_card: 
INFO: set param_card sminputs 1 100.0 
 
INFO: Event nb 0 current time: 23h39 
INFO: Event nb 1000  0.61s  
INFO: Event nb 2000  1.1s  
INFO: Event nb 3000  1.5s  
INFO: Event nb 4000  2.1s  
INFO: Event nb 5000  2.5s  
INFO: Event nb 6000  2.9s  
INFO: Event nb 7000  3.3s  
INFO: Event nb 8000  3.8s  
INFO: Event nb 9000  4.2s  
INFO: All event done  (nb_event: 10000)  4.6s  
INFO: Event /Users/omatt/Documents/eclipse/reweight_module/PROC_sm_11/Events/run_01/unweighted_events.lhe have now the additional weight 
INFO: new cross-section is : 1135.25 pb 
launch
set aewm1 200
INFO: modify param_card information BLOCK sminputs with id (1,) set to 200.0 
Do you want to edit one cards (press enter to bypass editing)?
  1 / param     : param_card.dat
  9 / plot      : plot_card.dat
 you can also
   - enter the path to a valid card or banner.
   - use the 'set' command to modify a parameter directly.
     The set option works only for param_card and run_card.
     Type 'help set' for more information on this command.
 [0, done, 1, param, 9, plot, enter path]
The answer to the previous question is not set in your input file
Use 0 value
INFO: starts to compute weight for events with the following modification to the param_card: 
INFO: set param_card sminputs 1 200.0 
 
INFO: Event nb 0 current time: 23h39 
INFO: Event nb 1000  0.48s  
INFO: Event nb 2000  1s  
INFO: Event nb 3000  1.5s  
INFO: Event nb 4000  2s  
INFO: Event nb 5000  2.4s  
INFO: Event nb 6000  2.9s  
INFO: Event nb 7000  3.3s  
INFO: Event nb 8000  3.8s  
INFO: Event nb 9000  4.2s  
INFO: All event done  (nb_event: 10000)  4.7s  
INFO: Event /Users/omatt/Documents/eclipse/reweight_module/PROC_sm_11/Events/run_01/unweighted_events.lhe have now the additional weight 
INFO: new cross-section is : 1095.28 pb 
launch
set aewm1 300
INFO: modify param_card information BLOCK sminputs with id (1,) set to 300.0 
Do you want to edit one cards (press enter to bypass editing)?
  1 / param     : param_card.dat
  9 / plot      : plot_card.dat
 you can also
   - enter the path to a valid card or banner.
   - use the 'set' command to modify a parameter directly.
     The set option works only for param_card and run_card.
     Type 'help set' for more information on this command.
 [0, done, 1, param, 9, plot, enter path]
The answer to the previous question is not set in your input file
Use 0 value
INFO: starts to compute weight for events with the following modification to the param_card: 
INFO: set param_card sminputs 1 300.0 
 
INFO: Event nb 0 current time: 23h39 
INFO: Event nb 1000  0.62s  
INFO: Event nb 2000  1.1s  
INFO: Event nb 3000  1.5s  
INFO: Event nb 4000  2s  
INFO: Event nb 5000  2.5s  
INFO: Event nb 6000  2.9s  
INFO: Event nb 7000  3.4s  
INFO: Event nb 8000  3.8s  
INFO: Event nb 9000  4.3s  
INFO: All event done  (nb_event: 10000)  4.7s  
INFO: Event /Users/omatt/Documents/eclipse/reweight_module/PROC_sm_11/Events/run_01/unweighted_events.lhe have now the additional weight 
INFO: new cross-section is : 1329.52 pb 
INFO: Original cross-section: 949.58665707 +- 2.2589158361 pb 
INFO: Computed cross-section: 
INFO: 1 : 1135.24526333 
INFO: 2 : 1095.27584154 
INFO: 3 : 1329.51775579

Validation

The validation of this tools is not yet finish. Use this tools with care. In particular in presence of decay chain, if you have identical particles in the final states coming from different decay. (For example p p > w+ z, w+ > e+ ve, z > e+ e-)

The comparison for the full cross-section are done like this:

./bin/madevent ./Cards/reweight_card.dat

p p > e+ e- cross-section

The reweight_card is the following:

launch
 set aewm1 100
launch 
 set aewm1 200
launch 
 set aewm1 300

The associated cross-section are
1. 1135.25 pb
2. 1095.28 pb
3. 1329.52 pb
The cross-section computed with MadEvent are
1. 1130 +- 2.815 pb
2. 1098 +- 2.478 pb
3. 1336 +- 2.777 pb

EWDIM6 Validation

The model use for this validation is the EWDIM6 (See: http://arxiv.org/abs/arXiv:1205.4231). 10k events where generated with the standard model (cross-section: 0.8008 ± 0.0026 pb)

The reweight_card was:

launch
   set Dim6 1 100
   set Dim6 2 0
   set Dim6 3 0
   set Dim6 4 0
   set Dim6 5 0
launch
   set Dim6 1 10
   set Dim6 2 0
   set Dim6 3 0
   set Dim6 4 0
   set Dim6 5 0
launch
   set Dim6 1 1
   set Dim6 2 0
   set Dim6 3 0
   set Dim6 4 0
   set Dim6 5 0
launch
   set Dim6 1 0.1
   set Dim6 2 0
   set Dim6 3 0
   set Dim6 4 0
   set Dim6 5 0
launch
   set Dim6 1 0.01
   set Dim6 2 0
   set Dim6 3 0
   set Dim6 4 0
   set Dim6 5 0

The same scan was done for the three first coupling (CWWW, CW, CB)

This is the result:

For CWWW

Coupling value (TeV^-2)	Reweight cross-section (pb)	MadEvent cross-section (pb)	Status
0.01	0.800810008029	0.7973 ± 0.0023	OK
0.1	0.800903791291	0.799 ± 0.0026	OK
1	0.802209013071	0.7987 ± 0.0025	OK
10	0.85200014698	0.8584 ± 0.00092	OK
100	5.0238030968	6.09 ± 0.0082	FAIL
100	5.04763	6.09 ± 0.0082	FAIL (make with a sample of 100k events)

The last entry fails since the expected distribution for such value of the coupling is too different from the distribution of the Standard Model. Such discrepancy are expected in this case. One hint is that the cross-section is an order of magnitude higher than the original one (Looking at the distribution confirm this).

For CW

Coupling value (TeV^-2)	Reweight cross-section (pb)	MadEvent cross-section (pb)	Status
0.01	0.800798262059	0.7953 +- 0.002497	OK
0.1	0.801379445746	0.7988 ± 0.0023	OK
1	0.806872565125	0.8065 ± 0.0023	OK
10	0.889336417677	0.8832 ± 0.003	OK
100	4.46724081967	4.519 ± 0.015	FAIL
100	4.44273	4.519 ± 0.015	FAIL (make with a sample of 100k events)

Same comment as for the previous coupling.

For CB

Coupling value (TeV^-2)	Reweight cross-section (pb)	MadEvent cross-section (pb)	Status
0.01	0.800798262059	0.7977 ± 0.0027	OK
0.1	0.800782626532	0.7985 ± 0.0024	OK
1	0.800626859275	0.7981 +- 0.002365	OK
10	0.799127987884	0.7971 ± 0.0024	OK
100	0.790019392142	0.7852 ± 0.0026	OK
100	0.786698206995	0.7852 ± 0.0026	OK (make with a sample of 100k events)

This operator has less impact on the cross-section/distributions, and therefore even a large value of the coupling is still working fine.

Note:

The cross-section obtained for 100k events sample is 0.7989 ± 0.00087
The statistical fluctuation of the original sample appears on the reweighing (as expected)

Attachments (6)

cwww_0.1.pdf (277.4 KB ) - added by Olivier Mattelaer 11 years ago.
cwww_0.01.pdf (277.4 KB ) - added by Olivier Mattelaer 11 years ago.
cwww_1.pdf (277.0 KB ) - added by Olivier Mattelaer 11 years ago.
cwww_10.pdf (280.9 KB ) - added by Olivier Mattelaer 11 years ago.
cwww_100.pdf (274.5 KB ) - added by Olivier Mattelaer 11 years ago.
15_12_11_ReWeighting_EFT.pdf (3.3 MB ) - added by Olivier Mattelaer 9 years ago.

Note: See TracWiki for help on using the wiki.

Download in other formats:

Plain Text