Version 16 (modified by 14 years ago) ( diff ) | ,
---|
The WHIZARD / O'Mega interface (C. Speckner)
Overview
The WHIZARD / O'Mega interface generates the model files necessary for the inclusion of a FeynRules model into the WHIZARD / O'Mega framework. All versions of WHIZARD / O'Mega >= 1.92 are supported.
Usage: all versions
As all other interfaces, the WO interface is invoked by calling WriteWOOuput
. Three syntax variants are admissible:
WriteWOOutput[Lagrangian, Options]
WriteWOOutput[{LagrangianList}, Options]
WriteWOOutput[Null, WOVertexList->{VertexList}, Options]
Version 1. operates on a single Lagrangian, while 2. operates on a list of Lagrangians and 3. takes a list of FeynmanRules as an argument. The following options are available:
WOVertexList
: If=!= Null
, this is interpreted as a list of Feynman rules and overrides any Lagrangian (or -list) specified (in this case,Null
is accepted as first argument). Default: NullWOModelName
: The name by which the model will be identified in WO. Note that all models for W1.9x have to start with "fr" (e.g.WOModelName->"fr_sm"
) if they are to be picked up by WO1.9x without user intervention (no such restriction exists for W2). Beware that the interface may modify this name if it doesn't fit into the WO naming schemes --- double check the generated messages to be sure. Default: derived from the FR model nameWOMaxNcf
: Upper limit on the number of color flows which the generated code will be able to handle (essentially n_8 - n_3 / 2, where n_8 is the maximum number of external octets and n_3 that of external triplets). Irrelevant for W2; also, the technically inclined user can change this after running the interface inf90_modellname_Col.ml
. Default: 4WOGauge
: The following gauges are available:WOUnitarity
: Unitarity gauge (default)WOFeynman
: Feynman gaugeWORxi
: Rxi gauges. In this case, you must define a parameter taking the role of \xi and pass it to the interface viaWOGaugeParameter
(see below).
WOGaugeParameter
: The parameter which takes the role of \xi in the Rxi gauges, can be either a string or a symbol. Default: "Rxi"WOWhizardVersion
: Select the WO version for which you want to generate code. Possible choices:"1.92"
: WO 1.92"1.93"
: WO 1.93 - 1.95"2.0"
: WO 2.0 (default)
WOVerbose
: Verbose output. At the moment, this gives detailed information on skipped vertices. Default: FalseWOAutoGauge
: Automagically assign goldstone boson masses.. Default: TrueWOMaxCouplingsPerFile
: The maximum number of couplings written into a single FORTRAN file. Reduce this number if you run into trouble compiling the generated code. Default: 500WORunParameters
: A list of all parameters which are recalculated when \alpha_s changes. Without effect for WO1.9x output. Default: {G, aS}WOFast
: Set this to False to enable more time consuming checks for known lorentz structures if you have trouble with skipped couplings. Default: TrueOutput
: The output directory which will contain the generated model files. Default: derived from the FR model name
It is wise to check the messages the interface generates while it runs; i these will inform you about any unidentified vertices that have been skipped as well as of most other noteworthy caveats concerning the generated code.
Usage: WO 1.9x
In order to use the interface with WO 1.9x, the build system of WHIZARD must be patched and the model files copied to the proper locations in the tree. This is taken care of by the script called inject
which is created by the interface in the output directory. The basic usage is (from within the output directory):
./inject [options] path_to_whizard
Running ./inject --help
will give a full overview over the supported options. After "injecting", the model is available in WHIZARD and will behave like the stock ones. However, some caveats exist for the unwary, so pay attention to the scripts output messages and be sure to read through this list carefully:
- The inject script has been designed to avoid any accidental change of existing data. Therefore, if a FeynRules model of the same name already exists, it will not be overwritten by default (the script will inform you if a file is being skipped though). To enforce overwriting of existing files, use the
--force
option. - If the number of distinct couplings changes significantly, the number of generated FORTRAN files may change. This can lead to problems with spurious files from a previous run being present in the WHIZARD tree, potentially wreaking havoc on the WHIZARD compilation. The script will inform you of such conflicts, and you can then rerun it with the
--cleanup
option to remove the conflicting files automatically. - Be sure to reconfigure WHIZARD (rerun the configure script) after injecting a model. Also, if the compilation fails, a
make clean
ormake realclean
in the WHIZARD tree can help to put a borked tree into a sane state again (take care as those remove your input files, so make copies before). - In order for the model to be picked up by WHIZARD, the WO mode name must start with "fr". This is taken care of automatically if the interface assigns it, but if you reset it via
WOModelName
, it is your responsibility to pick a proper name. - Writing multiple models to one output directory is possible and supported.
Usage: WO 2.0
WO 2.0 and above natively support the addition of new models without recompiling WHIZARD. More specifically, WHIZARD looks for any model specific files first in the uses local installation tree ${HOME}/.whizard
and the in the global installation tree ${PREFIX
}. Therefore, in order to use an external model with WO2, the O'Mega binaries and FORTRAN libraries must be compiled and installed in the proper directory together with the WHIZARD model definition. To the end, the WO interface creates a standard autotoolized (don't worry if you don't know what this means) ./configure; make install
type build system in the output directory. The build system supports multiple models in one output directory. To use it, you must perform three steps (in the output directory):
1) Configuration
./configure WO_CONFIG=path_to_the_wo_binaries --prefix=installation_prefix
Both options are optional. WO_CONFIG
can be used to specify the path to the WHIZARD binaries (otherwise, they are searched for in ${PATH
}), and --prefix
sets the installation prefix for the model files (~/.whizard
by default).
2) Compile
make clean; make
This compiles the O'Mega binary and the FORTRAN libraries. While not strictly necessary, the make clean
step is good practice to make sure no leftovers from previous compiles disturb the result.
3) Install
make install
Install the model files in the installation prefix.
Notes & caveats for the unwary: all versions
- The interface will refuse to write output to a directory which already contains model files generated for a different WO version.
- The list of supported operators is essentially limited to operators of dimension <= 4 together with some higher dimension ones (e.g. three point graviton-x-x couplings in ADD like models). This list will be expanded in the future.
- If vertices are skipped due to unidentified Lorentz structures, the option
WOFast -> False
can be used to enable more expensive checks for known operators. - Color structures are implicit in O'Mega and derived from the SU(3) representations of the particles at the vertex, limiting the currently available color structures. However, the interface will complain if an unsupported structure is encountered.
- For ADD-like graviton-x-x couplings, the mass of the particles couplings to the graviton must be declared as symbolic values (which, however, can be external parameters) if the vertex is to recognized.
- Make sure that the gauge used in the definition of the model matches that used by the interface (c.f.
WOGauge
). NB: If you allow the interface to automatically assign the goldstone boson masses viaWOAutoGauge
(the default), then any Feynman gauge model can be used for the Rxi gauges as well, provided that you define a parameter for \xi (see WOGaugeParameter above). - Complex parameters are automatically split into real and imaginary parts (with
_r}} resp. {{{_i
appended to the parameter name).
Notes & caveats for the unwary: WO 1.9x
- In order to be picked up by WHIZARD automatically, the model name must start with
fr
(c.f. the above description ofWOModelName
). - If you want to simulate processes with many external colored particles (e.g. 5+ gluons), you must increase
WOMaxNcf
from its default (see above). - WO 1.9x does not support running \alpha_s.
Notes & caveats for the unwary : WO 2.0
- Accepted complex internal parameters are currently limited to polynomials of complex parameters.
- All parameters given in the
WORunParameters
list as well as all vertex factors depending on those are recalculated when \alpha_s is run. If you want to have \alpha_s running at some vertices and constant at others (e.g. gluino vertices), you can do so by defining an alias for \alpha_s as a derived parameter.