Index: trunk/MultiChannelUSB/adc_pll.v
===================================================================
--- trunk/MultiChannelUSB/adc_pll.v	(revision 55)
+++ trunk/MultiChannelUSB/adc_pll.v	(revision 55)
@@ -0,0 +1,146 @@
+// megafunction wizard: %ALTPLL%
+// GENERATION: STANDARD
+// VERSION: WM1.0
+// MODULE: altpll 
+
+// ============================================================
+// File Name: adc_pll.v
+// Megafunction Name(s):
+// 			altpll
+//
+// Simulation Library Files(s):
+// 			altera_mf
+// ============================================================
+// ************************************************************
+// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
+//
+// 9.0 Build 132 02/25/2009 SJ Web Edition
+// ************************************************************
+
+
+//Copyright (C) 1991-2009 Altera Corporation
+//Your use of Altera Corporation's design tools, logic functions 
+//and other software and tools, and its AMPP partner logic 
+//functions, and any output files from any of the foregoing 
+//(including device programming or simulation files), and any 
+//associated documentation or information are expressly subject 
+//to the terms and conditions of the Altera Program License 
+//Subscription Agreement, Altera MegaCore Function License 
+//Agreement, or other applicable license agreement, including, 
+//without limitation, that your use is for the sole purpose of 
+//programming logic devices manufactured by Altera and sold by 
+//Altera or its authorized distributors.  Please refer to the 
+//applicable agreement for further details.
+
+
+// synopsys translate_off
+`timescale 1 ps / 1 ps
+// synopsys translate_on
+module adc_pll (
+	inclk0,
+	c0);
+
+	input	  inclk0;
+	output	  c0;
+
+	wire [4:0] sub_wire0;
+	wire [0:0] sub_wire4 = 1'h0;
+	wire [0:0] sub_wire1 = sub_wire0[0:0];
+	wire  c0 = sub_wire1;
+	wire  sub_wire2 = inclk0;
+	wire [1:0] sub_wire3 = {sub_wire4, sub_wire2};
+
+	altpll	altpll_component (
+				.inclk (sub_wire3),
+				.clk (sub_wire0),
+				.activeclock (),
+				.areset (1'b0),
+				.clkbad (),
+				.clkena ({6{1'b1}}),
+				.clkloss (),
+				.clkswitch (1'b0),
+				.configupdate (1'b0),
+				.enable0 (),
+				.enable1 (),
+				.extclk (),
+				.extclkena ({4{1'b1}}),
+				.fbin (1'b1),
+				.fbmimicbidir (),
+				.fbout (),
+				.locked (),
+				.pfdena (1'b1),
+				.phasecounterselect ({4{1'b1}}),
+				.phasedone (),
+				.phasestep (1'b1),
+				.phaseupdown (1'b1),
+				.pllena (1'b1),
+				.scanaclr (1'b0),
+				.scanclk (1'b0),
+				.scanclkena (1'b1),
+				.scandata (1'b0),
+				.scandataout (),
+				.scandone (),
+				.scanread (1'b0),
+				.scanwrite (1'b0),
+				.sclkout0 (),
+				.sclkout1 (),
+				.vcooverrange (),
+				.vcounderrange ());
+	defparam
+		altpll_component.bandwidth_type = "AUTO",
+		altpll_component.clk0_divide_by = 1,
+		altpll_component.clk0_duty_cycle = 50,
+		altpll_component.clk0_multiply_by = 6,
+		altpll_component.clk0_phase_shift = "0",
+		altpll_component.compensate_clock = "CLK0",
+		altpll_component.inclk0_input_frequency = 50000,
+		altpll_component.intended_device_family = "Cyclone III",
+		altpll_component.lpm_hint = "CBX_MODULE_PREFIX=adc_pll",
+		altpll_component.lpm_type = "altpll",
+		altpll_component.operation_mode = "NORMAL",
+		altpll_component.pll_type = "AUTO",
+		altpll_component.port_activeclock = "PORT_UNUSED",
+		altpll_component.port_areset = "PORT_UNUSED",
+		altpll_component.port_clkbad0 = "PORT_UNUSED",
+		altpll_component.port_clkbad1 = "PORT_UNUSED",
+		altpll_component.port_clkloss = "PORT_UNUSED",
+		altpll_component.port_clkswitch = "PORT_UNUSED",
+		altpll_component.port_configupdate = "PORT_UNUSED",
+		altpll_component.port_fbin = "PORT_UNUSED",
+		altpll_component.port_inclk0 = "PORT_USED",
+		altpll_component.port_inclk1 = "PORT_UNUSED",
+		altpll_component.port_locked = "PORT_UNUSED",
+		altpll_component.port_pfdena = "PORT_UNUSED",
+		altpll_component.port_phasecounterselect = "PORT_UNUSED",
+		altpll_component.port_phasedone = "PORT_UNUSED",
+		altpll_component.port_phasestep = "PORT_UNUSED",
+		altpll_component.port_phaseupdown = "PORT_UNUSED",
+		altpll_component.port_pllena = "PORT_UNUSED",
+		altpll_component.port_scanaclr = "PORT_UNUSED",
+		altpll_component.port_scanclk = "PORT_UNUSED",
+		altpll_component.port_scanclkena = "PORT_UNUSED",
+		altpll_component.port_scandata = "PORT_UNUSED",
+		altpll_component.port_scandataout = "PORT_UNUSED",
+		altpll_component.port_scandone = "PORT_UNUSED",
+		altpll_component.port_scanread = "PORT_UNUSED",
+		altpll_component.port_scanwrite = "PORT_UNUSED",
+		altpll_component.port_clk0 = "PORT_USED",
+		altpll_component.port_clk1 = "PORT_UNUSED",
+		altpll_component.port_clk2 = "PORT_UNUSED",
+		altpll_component.port_clk3 = "PORT_UNUSED",
+		altpll_component.port_clk4 = "PORT_UNUSED",
+		altpll_component.port_clk5 = "PORT_UNUSED",
+		altpll_component.port_clkena0 = "PORT_UNUSED",
+		altpll_component.port_clkena1 = "PORT_UNUSED",
+		altpll_component.port_clkena2 = "PORT_UNUSED",
+		altpll_component.port_clkena3 = "PORT_UNUSED",
+		altpll_component.port_clkena4 = "PORT_UNUSED",
+		altpll_component.port_clkena5 = "PORT_UNUSED",
+		altpll_component.port_extclk0 = "PORT_UNUSED",
+		altpll_component.port_extclk1 = "PORT_UNUSED",
+		altpll_component.port_extclk2 = "PORT_UNUSED",
+		altpll_component.port_extclk3 = "PORT_UNUSED",
+		altpll_component.width_clock = 5;
+
+
+endmodule