source: trunk/Octopus/uwt_bior31.v@ 166

module uwt_bior31
        #(
                parameter       L       =       1 // transform level
        )
        (
                input   wire                    clock, frame, reset,
                input   wire    [23:0]  x,
                output  wire    [23:0]  d,
                output  wire    [23:0]  a,
                output  wire    [23:0]  peak,
                output  wire    [1:0]   flag
        );

        localparam      index1          =       1 << (L - 1);
        localparam      index2          =       2 << (L - 1);
        localparam      index3          =       3 << (L - 1);
        localparam      peak_index      =       ((index3 + 1) >> 1) + 1;
        localparam      peak_shift      =       ((L - 1) << 1) + (L - 1);
        localparam      zero            =       24'h800000;
        
        // Tapped delay line
        reg             [23:0]  tap_reg [index3:0];
        reg             [23:0]  tap_next [index3:0];
        
        reg             [23:0]  d_reg, d_next;
        reg             [23:0]  a_reg, a_next;
        reg             [23:0]  peak_reg, peak_next;

        reg             [23:0]  tmp1_reg, tmp1_next;
        reg             [23:0]  tmp2_reg, tmp2_next;

        reg                             less_reg, less_next;
        reg                             more_reg, more_next;

        reg             [1:0]   flag_reg, flag_next;

        reg                             int_case_reg, int_case_next;

        integer                 i;
        
        always @(posedge clock)
        begin
                if (reset)
                begin
                        d_reg <= 0;
                        a_reg <= 0;
                        peak_reg <= 0;

                        tmp1_reg <= 0;
                        tmp2_reg <= 0;
                        less_reg <= 1'b0;
                        more_reg <= 1'b0;
                        flag_reg <= 0;

                        int_case_reg <= 1'b0;

                        for(i = 0; i <= index3; i = i + 1)
                        begin
                                tap_reg[i] <= 0;
                        end
                end
                else
                begin
                        d_reg <= d_next;
                        a_reg <= a_next;
                        peak_reg <= peak_next;
                        
                        tmp1_reg <= tmp1_next;
                        tmp2_reg <= tmp2_next;
                        less_reg <= less_next;
                        more_reg <= more_next;
                        flag_reg <= flag_next;

                        int_case_reg <= int_case_next;
                        
                        for(i = 0; i <= index3; i = i + 1)
                        begin
                                tap_reg[i] <= tap_next[i];
                        end                     
                end
        end
        
        always @*
        begin
                d_next = d_reg;
                a_next = a_reg;
                peak_next = peak_reg;
                
                tmp1_next = tmp1_reg;
                tmp2_next = tmp2_reg;
                less_next = less_reg;
                more_next = more_reg;
                flag_next = flag_reg;

                int_case_next = int_case_reg;
                
                for(i = 0; i <= index3; i = i + 1)
                begin
                        tap_next[i] = tap_reg[i];
                end

                case (int_case_reg)

                        0:
                        begin
                                if (frame)
                                begin           
                                        // Tapped delay line: shift one
                                        for(i = 0; i < index3; i = i + 1)
                                        begin
                                                tap_next[i+1] = tap_reg[i];
                                        end
                                        
                                        // Input in register 0
                                        tap_next[0] = x;

                                        tmp1_next = tap_reg[index3] + {tap_reg[index2][22:0], 1'b0} + tap_reg[index2];
                                        tmp2_next = {tap_reg[index1][22:0], 1'b0} + tap_reg[index1] + tap_reg[0];

                                        more_next = (d_reg > zero);
                                        less_next = (d_reg < zero);
        
                                        flag_next[0] = (less_reg) & (~less_next);
                                        flag_next[1] = (more_reg) & (~more_next);

                                        peak_next = (tap_reg[peak_index] >> peak_shift);

                                        int_case_next = 1'b1;
                                end
                        end

                        1:
                        begin
                                // Compute d and a with the filter coefficients.
                                // The coefficients are [1, 3, -3, -1] and [1, 3, 3, 1]
                                d_next = zero - tmp1_reg + tmp2_reg;
                                a_next = tmp1_reg + tmp2_reg;
                                int_case_next = 1'b0;
                        end

                endcase
                
        end

        // output logic
        assign  d               =       d_reg;
        assign  a               =       a_reg;
        assign  peak    =       peak_reg;
        assign  flag    =       flag_reg;

endmodule