source: trunk/Octopus/analyser.v@ 162

module analyser
        (
                input   wire                    clock, frame, reset,
                input   wire    [15:0]  cfg_data,
                input   wire    [1:0]   uwt_flag,
                input   wire    [11:0]  uwt_data,
                output  wire                    ana_good,
                output  wire    [11:0]  ana_data
        );

        reg                             state_reg, state_next;
        reg             [3:0]   counter_reg, counter_next;
        reg             [11:0]  minimum_reg, minimum_next;
        reg                             good_reg, good_next;
        reg             [11:0]  data_reg, data_next;

        always @(posedge clock)
        begin
                if (reset)
                begin
                        state_reg <= 1'b0;
                        counter_reg <= 4'd0;
                        minimum_reg <= 12'd0;
                        good_reg <= 1'b0;
                        data_reg <= 12'd0;
                end
                else
                begin
                        state_reg <= state_next;
                        counter_reg <= counter_next;
                        minimum_reg <= minimum_next;
                        good_reg <= good_next;
                        data_reg <= data_next;
                end
        end
        
        always @*
        begin
                state_next = state_reg;
                counter_next = counter_reg;
                minimum_next = minimum_reg;
                good_next = good_reg;
                data_next = data_reg;
                
                case (state_reg)
                        0:
                        begin
                                if (frame)
                                begin
                                        // minimum
                                        if (uwt_flag[0])
                                        begin
                                                counter_next = cfg_data[3:0];
                                                minimum_next = uwt_data;
                                        end
                                        // counter is not zero
                                        else if (|counter_reg)
                                        begin
                                                counter_next = counter_reg - 4'd1;
                                        end
                                        // maximum
                                        else if ((uwt_flag[1]) & (uwt_data > minimum_reg))
                                        begin
                                                data_next = uwt_data - minimum_reg;
                                                state_next = 1'b1;
                                        end
                end
                        end
                        
                        1:
                        begin
                                good_next = (data_reg >= cfg_data[15:4]);
                                state_next = 1'b0;
                        end

                endcase
        end

        assign ana_good = good_reg;
        assign ana_data = data_reg;

endmodule