source: trunk/Octopus/adc_lvds.v@ 162

module adc_lvds
        #(
                parameter       size    =       8, // number of channels
                parameter       width   =       24 // channel resolution
        )
        (
                input   wire                                            clock,

                input   wire                                            lvds_dco,
                input   wire                                            lvds_fco,
                input   wire    [size-1:0]                      lvds_d,

                output  wire                                            adc_frame,
                output  wire    [size*width-1:0]        adc_data

        );

        reg                             state, int_rdreq, adc_frame_reg;
        wire                    int_wrfull, int_rdempty;

        reg             [size-1:0]      int_data_h, int_data_l;

        reg     [size*width-1:0]        int_data_reg;
        wire    [size*width-1:0]        int_data_wire;

        wire    [size*width-1:0]        int_q_wire;
        reg             [size*width-1:0]        adc_data_reg;
        

        genvar j;

        generate
                for (j = 0; j < size; j = j + 1)
                begin : INT_DATA
                        assign int_data_wire[j*width+width-1:j*width] = {int_data_reg[j*width+width-3:j*width], int_data_h[j], int_data_l[j]};
                end
        endgenerate

        dcfifo #(
                .intended_device_family("Cyclone III"),
                .lpm_numwords(16),
                .lpm_showahead("ON"),
                .lpm_type("dcfifo"),
                .lpm_width(size*width),
                .lpm_widthu(4),
                .rdsync_delaypipe(4),
                .wrsync_delaypipe(4),
                .overflow_checking("ON"),
                .underflow_checking("ON"),
                .use_eab("ON")) fifo_unit (
                .data(int_data_wire),
                .rdclk(clock),
                .rdreq((~int_rdempty) & int_rdreq),
                .wrclk(lvds_fco),
                .wrreq(~int_wrfull),
                .q(int_q_wire),
                .rdempty(int_rdempty),
                .wrfull(int_wrfull),
                .aclr(),
                .rdfull(),
                .rdusedw(),
                .wrempty(),
                .wrusedw());

        always @ (posedge clock)
        begin
                case (state)
                        1'b0:
                        begin
                                int_rdreq <= 1'b1;
                                adc_frame_reg <= 1'b0;
                                state <= 1'b1;
                        end

                        1'b1: 
                        begin
                                if (~int_rdempty)
                                begin
                                        int_rdreq <= 1'b0;
                                        adc_data_reg <= int_q_wire;
                                        adc_frame_reg <= 1'b1;
                                        state <= 1'b0;
                                end
                        end
                endcase
        end
        
        always @ (negedge lvds_dco)
        begin
                int_data_l <= lvds_d;
        end

        always @ (posedge lvds_dco)
        begin
                int_data_h <= lvds_d;
                int_data_reg <= int_data_wire;
        end

        assign  adc_frame = adc_frame_reg;
        assign  adc_data = adc_data_reg;

endmodule