source: trunk/MultiChannelUSB/control.v@ 61

module control
        (
                input   wire                    clk,
                input   wire                    rx_empty, tx_full,
                input   wire    [7:0]   rx_data,
                input   wire    [1:0]   mux_max_byte,
                input   wire    [15:0]  mux_min_addr, mux_max_addr,
                input   wire    [7:0]   mux_q,

                output  wire                    mux_reset,
                output  wire                    mux_type,
                output  wire    [1:0]   mux_chan,
                output  wire    [1:0]   mux_byte,
                output  wire    [15:0]  mux_addr,
                output  wire                    rx_rdreq,
                output  wire                    tx_wrreq,
                output  wire    [7:0]   tx_data,
                output  wire                    led
        );

        reg             [23:0]  rx_counter;
        reg             [10:0]  tst_counter;    
        reg     [15:0]  int_addr, int_max_addr;

        reg                             int_rdreq, int_wrreq;
        reg                             int_type, int_reset;
        reg             [1:0]   int_chan, int_byte, int_max_byte;
        reg             [7:0]   int_data;
        reg                             int_led;


        reg             [3:0]   state;

        always @(posedge clk)
        begin
                if (~rx_empty)
                begin
                        int_led <= 1'b0;
                        rx_counter <= 24'd0;
                end
                else
                begin
                        if (&rx_counter)
                        begin
                                int_led <= 1'b1;
                        end
                        else
                        begin
                                rx_counter <= rx_counter + 24'd1;
                        end
                end

                case(state)
                        1:
                        begin
                                int_rdreq <= 1'b1;
                                int_wrreq <= 1'b0;
                                int_type <= 1'b0;
                                int_chan <= 2'd0;
                                int_byte <= 2'd0;       
                                int_reset <= 1'b0;
                                state <= 4'd2;
                        end

                        2: 
                        begin
                                if (~rx_empty)
                                begin
                                        case (rx_data)
                                                8'h40, 8'h41, 8'h42, 8'h43, 8'h50, 8'h51, 8'h52, 8'h53:
                                                begin
                                                        int_rdreq <= 1'b0;
                                                        int_type <= rx_data[4];
                                                        int_chan <= rx_data[1:0];
                                                        int_reset <= 1'b1;
                                                        state <= 4'd1;
                                                end

                                                8'h60, 8'h61, 8'h62, 8'h63, 8'h70, 8'h71, 8'h72, 8'h73:
                                                begin
                                                        int_rdreq <= 1'b0;
                                                        int_type <= rx_data[4];
                                                        int_chan <= rx_data[1:0];
                                                        state <= 4'd3;
                                                end

                                                8'h30:
                                                begin
                                                        int_rdreq <= 1'b0;
                                                        state <= 4'd1;
                                                end

                                                8'h31:
                                                begin
                                                        int_rdreq <= 1'b0;
                                                        tst_counter <= 11'd0;   
                                                        state <= 4'd6;
                                                end
                                        endcase
                                end
                        end
                        // mux transfer
                        3:
                        begin
                                int_addr <= mux_min_addr;
                                int_max_addr <= mux_min_addr + mux_max_addr;
                                int_max_byte <= mux_max_byte;
                                int_byte <= 2'd0;       
                                state <= 4'd4;
                        end
        
                        4:
                        begin
                                int_wrreq <= 1'b0;
                                state <= 4'd5;
                        end

                        5:
                        begin
                                if (~tx_full)
                                begin
                                        int_data <= mux_q;
                                        int_wrreq <= 1'b1;
                                        if ((int_byte == int_max_byte) && (int_addr == int_max_addr))
                                        begin
                                                state <= 4'd1;
                                        end
                                        else
                                        begin
                                                state <= 4'd4;
                                                if (int_byte == int_max_byte)
                                                begin
                                                        int_addr <= int_addr + 16'd1;
                                                        int_byte <= 2'd0;
                                                end
                                                else
                                                begin
                                                        int_byte <= int_byte + 2'd1;
                                                end
                                        end
                                end
                        end

                        // tst transfer
                        6:
                        begin
                                int_data <= tst_counter;
                                int_wrreq <= 1'b1;
                                tst_counter <= tst_counter + 11'd1;
                                state <= 4'd8;
                        end
                        7:
                        begin
                                if (~tx_full)
                                begin
                                        int_data <= tst_counter;
                                        if (tst_counter == 11'd0)
                                        begin
                                                state <= 4'd9;
                                        end
                                        else
                                        begin
                                                tst_counter <= tst_counter + 11'd1;
                                        end
                                end
                        end
                        8:
                        begin
                                if (~tx_full)
                                begin
                                        int_wrreq <= 1'b0;
                                        state <= 4'd1;
                                end
                        end
                                                
                        default:
                        begin
                                state <= 4'd1;
                        end
                endcase
        end
        
        assign  mux_reset = int_reset;
        assign  mux_type = int_type;
        assign  mux_chan = int_chan;
        assign  mux_byte = int_byte;
        assign  mux_addr = int_addr;
        assign  rx_rdreq = int_rdreq & (~rx_empty);
        assign  tx_wrreq = int_wrreq & (~tx_full);
        assign  tx_data = int_data;
        assign  led = int_led;

endmodule