source: trunk/FirmwareFX2/dscr.a51@ 167

Last change on this file since 167 was 136, checked in by demin, 14 years ago

swap ep6/ep8 and reorganize usb_jtag_init
File size: 15.6 KB
RevLine 
[7]1;;; -*- asm -*-
2;;;
3;;;-----------------------------------------------------------------------------
4;;; USB Descriptor(s)
5;;;-----------------------------------------------------------------------------
6;;; Copyright 2005..2007 Kolja Waschk, ixo.de
7;;; Modified by LAP for FPGA4U project, Jan 2007. lap.epfl.ch
8;;;-----------------------------------------------------------------------------
9;;; Code based on USRP2 firmware (GNU Radio Project), version 3.0.2,
10;;; Copyright 2003 Free Software Foundation, Inc.
11;;;-----------------------------------------------------------------------------
12;;; This code is part of usbjtag. usbjtag is free software; you can redistribute
13;;; it and/or modify it under the terms of the GNU General Public License as
14;;; published by the Free Software Foundation; either version 2 of the License,
15;;; or (at your option) any later version. usbjtag is distributed in the hope
16;;; that it will be useful, but WITHOUT ANY WARRANTY; without even the implied
17;;; warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18;;; GNU General Public License for more details. You should have received a
19;;; copy of the GNU General Public License along with this program in the file
20;;; COPYING; if not, write to the Free Software Foundation, Inc., 51 Franklin
21;;; St, Fifth Floor, Boston, MA 02110-1301 USA
22;;;-----------------------------------------------------------------------------
23
24 .module usb_descriptors
25
26 VID = 0x09FB ; Changed by LAP to match Altera VID
27 PID = 0x6001 ; Changed by LAP to match Altera USBBlaster PID
28 VERSION = 0x0400 ; Product Version (4 indicates *BM device)
29 USB_VER = 0x0110 ; Support USB version 1.10
30 USB_ATTR = 0x80 ; Bus powered, not self-powered, no remote wakeup
31 FTD_ATTR = 0x001C ; Set USB version, use version string, enable suspend PD
32 MAX_POWER = 75 ; need 2*75 mA max
33
34 DSCR_DEVICE = 1 ; Descriptor type: Device
35 DSCR_CONFIG = 2 ; Descriptor type: Configuration
36 DSCR_STRING = 3 ; Descriptor type: String
37 DSCR_INTRFC = 4 ; Descriptor type: Interface
38 DSCR_ENDPNT = 5 ; Descriptor type: Endpoint
39 DSCR_DEVQUAL = 6 ; Descriptor type: Device Qualifier
40
41 DSCR_DEVICE_LEN = 18
42 DSCR_CONFIG_LEN = 9
43 DSCR_INTRFC_LEN = 9
44 DSCR_ENDPNT_LEN = 7
45 DSCR_DEVQUAL_LEN = 10
46
47 ET_CONTROL = 0 ; Endpoint type: Control
48 ET_ISO = 1 ; Endpoint type: Isochronous
49 ET_BULK = 2 ; Endpoint type: Bulk
50 ET_INT = 3 ; Endpoint type: Interrupt
51
52;;; --------------------------------------------------------
53;;; external ram data
54;;;--------------------------------------------------------
55
56 .area USBDESCSEG (XDATA)
57
58;;; ----------------------------------------------------------------
59;;; descriptors used when operating at high speed (480Mb/sec)
60;;; ----------------------------------------------------------------
61
62 .even ; descriptors must be 2-byte aligned for SUDPTR{H,L} to work
63
64 ;; The .even directive isn't really honored by the linker. Bummer!
65 ;; (There's no way to specify an alignment requirement for a given area,
66 ;; hence when they're concatenated together, even doesn't work.)
67 ;;
68 ;; We work around this by telling the linker to put USBDESCSEG
69 ;; at 0xE000 absolute. This means that the maximimum length of this
70 ;; segment is 480 bytes, leaving room for the two hash slots
71 ;; at 0xE1EO to 0xE1FF.
72 ;; Note from LAP: TODOOOOO
73
74_high_speed_device_descr::
75 .db DSCR_DEVICE_LEN
76 .db DSCR_DEVICE
77_dscr_usbver::
78 .db <USB_VER ; Specification version (LSB)
79 .db >USB_VER ; Specification version (MSB)
80 .db 0x00 ; device class (vendor specific)
81 .db 0x00 ; device subclass (vendor specific)
82 .db 0x00 ; device protocol (vendor specific)
83 .db 64 ; bMaxPacketSize0 for endpoint 0
84_dscr_vidpidver::
85 .db <VID ; idVendor
86 .db >VID ; idVendor
87 .db <PID ; idProduct
88 .db >PID ; idProduct
89 .db <VERSION ; bcdDevice
90 .db >VERSION ; bcdDevice
91_dscr_strorder::
92 .db SI_VENDOR ; iManufacturer (string index)
93 .db SI_PRODUCT ; iProduct (string index)
94 .db SI_SERIAL ; iSerial number (string index)
95 .db 1 ; bNumConfigurations
96
97 .even
98_high_speed_devqual_descr::
99 .db DSCR_DEVQUAL_LEN
100 .db DSCR_DEVQUAL
101 .db <USB_VER ; bcdUSB (LSB)
102 .db >USB_VER ; bcdUSB (MSB)
103 .db 0xFF ; bDeviceClass
104 .db 0xFF ; bDeviceSubClass
105 .db 0xFF ; bDeviceProtocol
106 .db 64 ; bMaxPacketSize0
107 .db 1 ; bNumConfigurations (one config at 12Mb/sec)
108 .db 0 ; bReserved
109
110 .even
111_high_speed_config_descr::
112 .db DSCR_CONFIG_LEN
113 .db DSCR_CONFIG
114 .db <(_high_speed_config_descr_end - _high_speed_config_descr) ; LSB
115 .db >(_high_speed_config_descr_end - _high_speed_config_descr) ; MSB
116 .db 2 ; bNumInterfaces
117 .db 1 ; bConfigurationValue
118 .db 0 ; iConfiguration
119_dscr_attrpow::
120 .db USB_ATTR ; bmAttributes
121 .db MAX_POWER ; bMaxPower [Unit: 0.5 mA]
122
123 ;; interface descriptor
124
125 .db DSCR_INTRFC_LEN
126 .db DSCR_INTRFC
127 .db 0 ; bInterfaceNumber (zero based)
128 .db 0 ; bAlternateSetting
129 .db 2 ; bNumEndpoints
130 .db 0xFF ; bInterfaceClass (vendor specific)
131 .db 0xFF ; bInterfaceSubClass (vendor specific)
132 .db 0xFF ; bInterfaceProtocol (vendor specific)
133 .db SI_PRODUCT ; iInterface (description)
134
135 ;; endpoint descriptor
136
137 .db DSCR_ENDPNT_LEN
138 .db DSCR_ENDPNT
139 .db 0x81 ; bEndpointAddress (ep 1 IN)
140 .db ET_BULK ; bmAttributes
141 .db <64 ; wMaxPacketSize (LSB)
142 .db >64 ; wMaxPacketSize (MSB)
143 .db 0 ; bInterval (iso only)
144
145 ;; endpoint descriptor
146
147 .db DSCR_ENDPNT_LEN
148 .db DSCR_ENDPNT
149 .db 0x02 ; bEndpointAddress (ep 2 OUT)
150 .db ET_BULK ; bmAttributes
151 .db <64 ; wMaxPacketSize (LSB)
152 .db >64 ; wMaxPacketSize (MSB)
153 .db 0 ; bInterval (iso only)
154
155 ;; interface descriptor
156
157 .db DSCR_INTRFC_LEN
158 .db DSCR_INTRFC
159 .db 1 ; bInterfaceNumber (zero based)
160 .db 0 ; bAlternateSetting
161 .db 2 ; bNumEndpoints
162 .db 0xFF ; bInterfaceClass (vendor specific)
163 .db 0xFF ; bInterfaceSubClass (vendor specific)
164 .db 0xFF ; bInterfaceProtocol (vendor specific)
165 .db SI_PRODUCT ; iInterface (description)
166
167 ;; endpoint descriptor
168
169 .db DSCR_ENDPNT_LEN
170 .db DSCR_ENDPNT
[136]171 .db 0x86 ; bEndpointAddress (ep 6 IN)
[7]172 .db ET_BULK ; bmAttributes
173 .db 0x00 ; wMaxPacketSize (LSB)
174 .db 0x02 ; wMaxPacketSize (MSB)
175 .db 0x00 ; Polling interval
176
177 ;; endpoint descriptor
178 .db DSCR_ENDPNT_LEN
179 .db DSCR_ENDPNT
[136]180 .db 0x08 ; bEndpointAddress (ep 8 OUT)
[7]181 .db ET_BULK ; bmAttributes
182 .db 0x00 ; wMaxPacketSize (LSB)
183 .db 0x02 ; wMaxPacketSize (MSB)
184 .db 0x00 ; Polling interval
185
186_high_speed_config_descr_end:
187
188;;; ----------------------------------------------------------------
189;;; descriptors used when operating at full speed (12Mb/sec)
190;;; ----------------------------------------------------------------
191
192 .even
193_full_speed_device_descr::
194 .db DSCR_DEVICE_LEN
195 .db DSCR_DEVICE
196 .db <USB_VER ; Specification version (LSB)
197 .db >USB_VER ; Specification version (MSB)
198 .db 0x00 ; device class (vendor specific)
199 .db 0x00 ; device subclass (vendor specific)
200 .db 0x00 ; device protocol (vendor specific)
201 .db 64 ; bMaxPacketSize0 for endpoint 0
202 .db <VID ; idVendor
203 .db >VID ; idVendor
204 .db <PID ; idProduct
205 .db >PID ; idProduct
206 .db <VERSION ; bcdDevice
207 .db >VERSION ; bcdDevice
208 .db SI_VENDOR ; iManufacturer (string index)
209 .db SI_PRODUCT ; iProduct (string index)
210 .db SI_SERIAL ; iSerial number (None)
211 .db 1 ; bNumConfigurations
212
213;;; describes the other speed (480Mb/sec)
214 .even
215_full_speed_devqual_descr::
216 .db DSCR_DEVQUAL_LEN
217 .db DSCR_DEVQUAL
218 .db <USB_VER ; bcdUSB
219 .db >USB_VER ; bcdUSB
220 .db 0xFF ; bDeviceClass
221 .db 0xFF ; bDeviceSubClass
222 .db 0xFF ; bDeviceProtocol
223 .db 64 ; bMaxPacketSize0
224 .db 1 ; bNumConfigurations (one config at 480Mb/sec)
225 .db 0 ; bReserved
226
227 .even
228_full_speed_config_descr::
229 .db DSCR_CONFIG_LEN
230 .db DSCR_CONFIG
231 .db <(_full_speed_config_descr_end - _full_speed_config_descr) ; LSB
232 .db >(_full_speed_config_descr_end - _full_speed_config_descr) ; MSB
233 .db 2 ; bNumInterfaces
234 .db 1 ; bConfigurationValue
235 .db 0 ; iConfiguration
236 .db USB_ATTR ; bmAttributes
237 .db MAX_POWER ; bMaxPower [Unit: 0.5 mA]
238
239 ;; interface descriptor
240
241 .db DSCR_INTRFC_LEN
242 .db DSCR_INTRFC
243 .db 0 ; bInterfaceNumber (zero based)
244 .db 0 ; bAlternateSetting
245 .db 2 ; bNumEndpoints
246 .db 0xFF ; bInterfaceClass (vendor specific)
247 .db 0xFF ; bInterfaceSubClass (vendor specific)
248 .db 0xFF ; bInterfaceProtocol (vendor specific)
249 .db SI_PRODUCT ; iInterface (description)
250
251 ;; endpoint descriptor
252
253 .db DSCR_ENDPNT_LEN
254 .db DSCR_ENDPNT
255 .db 0x81 ; bEndpointAddress (ep 1 IN)
256 .db ET_BULK ; bmAttributes
257 .db <64 ; wMaxPacketSize (LSB)
258 .db >64 ; wMaxPacketSize (MSB)
259 .db 0 ; bInterval (iso only)
260
261 ;; endpoint descriptor
262
263 .db DSCR_ENDPNT_LEN
264 .db DSCR_ENDPNT
265 .db 0x02 ; bEndpointAddress (ep 2 OUT)
266 .db ET_BULK ; bmAttributes
267 .db <64 ; wMaxPacketSize (LSB)
268 .db >64 ; wMaxPacketSize (MSB)
269 .db 0 ; bInterval (iso only)
270
271 ;; interface descriptor
272
273 .db DSCR_INTRFC_LEN
274 .db DSCR_INTRFC
275 .db 1 ; bInterfaceNumber (zero based)
276 .db 0 ; bAlternateSetting
277 .db 2 ; bNumEndpoints
278 .db 0xFF ; bInterfaceClass (vendor specific)
279 .db 0xFF ; bInterfaceSubClass (vendor specific)
280 .db 0xFF ; bInterfaceProtocol (vendor specific)
281 .db SI_PRODUCT ; iInterface (description)
282
283 ;; endpoint descriptor
284
285 .db DSCR_ENDPNT_LEN
286 .db DSCR_ENDPNT
[136]287 .db 0x86 ; bEndpointAddress (ep 6 IN)
[7]288 .db ET_BULK ; bmAttributes
289 .db 0x40 ; wMaxPacketSize (LSB)
290 .db 0x00 ; wMaxPacketSize (MSB)
291 .db 0 ; bInterval (iso only)
292
293 ;; endpoint descriptor
294
295 .db DSCR_ENDPNT_LEN
296 .db DSCR_ENDPNT
[136]297 .db 0x08 ; bEndpointAddress (ep 8 OUT)
[7]298 .db ET_BULK ; bmAttributes
299 .db 0x40 ; wMaxPacketSize (LSB)
300 .db 0x00 ; wMaxPacketSize (MSB)
301 .db 0 ; bInterval (iso only)
302
303
304_full_speed_config_descr_end:
305
306;;; ----------------------------------------------------------------
307;;; string descriptors
308;;; ----------------------------------------------------------------
309
310_nstring_descriptors::
311 .db (_string_descriptors_end - _string_descriptors) / 2
312
313_string_descriptors::
314 .db <str0, >str0
315 .db <str1, >str1
316 .db <str2, >str2
[24]317 .db <str3, >str3
[7]318_string_descriptors_end:
319
320 SI_NONE = 0
321 ;; str0 contains the language ID's.
322 .even
323_str0::
324str0: .db str0_end - str0
325 .db DSCR_STRING
326 .db 0
327 .db 0
328 .db <0x0409 ; magic code for US English (LSB)
329 .db >0x0409 ; magic code for US English (MSB)
330str0_end:
331
332 SI_VENDOR = 1
333 .even
334_str1::
335str1: .db str1_end - str1
336 .db DSCR_STRING
337 .db 'A, 0 ; 16-bit unicode
338 .db 'l, 0
339 .db 't, 0
340 .db 'e, 0
341 .db 'r, 0
342 .db 'a, 0
343str1_end:
344
345 SI_PRODUCT = 2
346 .even
347_str2::
348str2: .db str2_end - str2
349 .db DSCR_STRING
350 .db 'U, 0
351 .db 'S, 0
352 .db 'B, 0
353 .db '-, 0
354 .db 'B, 0
355 .db 'l, 0
356 .db 'a, 0
357 .db 's, 0
358 .db 't, 0
359 .db 'e, 0
360 .db 'r, 0
361str2_end:
362
363 SI_SERIAL = 3
364 .even
365_str3::
366str3: .db str3_end - str3
367 .db DSCR_STRING
368 .db '0, 0
369 .db '0, 0
370 .db '0, 0
371 .db '0, 0
372 .db '0, 0
373 .db '0, 0
374 .db '0, 0
375 .db '0, 0
376str3_end:
377
378
Note: See TracBrowser for help on using the repository browser.