source: sandbox/MultiChannelUSB/test.v@ 116

module test
        (
                input   wire                    clock,
                output  wire    [11:0]  data
        );

        reg     [11:0]  int_addr;

        always @(posedge clock)
        begin
                if (int_addr == 12'd2559)
                begin
                        int_addr <= 12'd0;
                end
                else
                begin
                        int_addr <= int_addr + 12'd1;
                end

        end

        altsyncram #(
                .address_aclr_a("NONE"),
                .clock_enable_input_a("BYPASS"),
                .clock_enable_output_a("BYPASS"),
                .init_file("test.mif"),
                .intended_device_family("Cyclone III"),
                .lpm_hint("ENABLE_RUNTIME_MOD=NO"),
                .lpm_type("altsyncram"),
                .numwords_a(2560),
                .operation_mode("ROM"),
                .outdata_aclr_a("NONE"),
                .outdata_reg_a("CLOCK0"),
                .widthad_a(12),
                .width_a(12),
                .width_byteena_a(1)) test_rom_unit (
                .clock0(clock),
                .address_a(int_addr),
                .q_a(data),
                .aclr0(1'b0),
                .aclr1(1'b0),
                .address_b(1'b1),
                .addressstall_a(1'b0),
                .addressstall_b(1'b0),
                .byteena_a(1'b1),
                .byteena_b(1'b1),
                .clock1(1'b1),
                .clocken0(1'b1),
                .clocken1(1'b1),
                .clocken2(1'b1),
                .clocken3(1'b1),
                .data_a({12{1'b1}}),
                .data_b(1'b1),
                .eccstatus(),
                .q_b(),
                .rden_a(1'b1),
                .rden_b(1'b1),
                .wren_a(1'b0),
                .wren_b(1'b0));

endmodule