3.4.0:
- corrected granularities for ECAL and HCAL in CMS default cards
- improved particle flow algorithm
- updated FastJet library to 3.2.1
- updated Nsubjettiness library to 2.2.4
- added scripts that produce validation plots
- added DelphesROOT reader
- added TrackSmearing and BeamSpotFilter modules
- completed TimeSmearing module
- added preliminary version of vertex clustering algorithm in 3/4D, VertexFinder and VertexFinder4D (special thanks to A. Hart and L. Gray)
- fixed muon efficiency at high energy
- replaced gaussian smearing with lognormal in MomentumSmearing module

3.3.3:
- improved compatibility with ROOT >= 6.04
- removed test of praticle stability based on ROOT pdgtable (#347, #753, #821, #855)
- fixed bugs in DelphesCMSFWLite
- fixed bugs in PUPPI
- fixed compiler and linker flags for Pythia8
- added CMS Phase II cards
- added particle gun to DelphesPythia8
- added jet merging to DelphesPythia8 based on Pythia8 main32.cc
- added UseMiniCone option in Isolation module
- added RecoPuFilter module
- added back OldCalorimeter for CheckMate bwd compatibilty (#591)
- updated tracking and calorimeter resolution in CMS cards

3.3.2:
- added pre-validated card for CMS upgrade Phase II studies
- added TrackCountingTauTagging module (a la CheckMate)
- updated tau-tagging efficiency according to ATL-PHYS-PUB-2015-045

3.3.1:
- corrected light parton mistag rate in b-tagging formula for CMS and ILD cards
- added tracks to output in ILD card to enable root2lhco conversion
- fixed muon collection in ILD card
- added example for pileup generation with Pythia8
- moved to loose isolation working points for ATLAS and CMS cards
- added UseRhoCorrection switch to decide which isolation variable use for selection (true by default)
- switch to Rapidity selector (SelectorRapRange) for pile-up density computation in FastJet to ensure backward compatibility
- addressed N-subjettiness warnings in 2.2.1 version

3.3.0:
- improved energy-flow algorithm for high momentum
- updated b-tagging parameterisations to recent ATLAS and CMS publications
- updated FastJet library to 3.1.3
- updated Nsubjettiness library to 2.2.1
- added a detector card for the ILD detector (for ILC)  based on http://arxiv.org/abs/1306.6329
- adapted examples, EventDisplay, DelphesFormula and DelphesTF2 to ROOT 6.04
- fixed tau-tagging for events without tau (thanks to Sho Iwamoto)
- fixed UniqueObjectFinder (#728)
- added JetFakeParticle module
- added PhotonConversions module
- added TaggingParticlesSkimmer module
- added phi and energy dependence to AngularSmearing, BTagging, Efficiency, EnergyScale, EnergySmearing, IdentificationMap, ImpactParameterSmearing and MomentumSmearing
- added IsRecoPU flag and PTMin parameter to TrackPileUpSubtractor
- added Invert and Status options to PdgCodeFilter (thanks to Chase Shimmin)
- added new isolation variables to Candidate, Electron, Muon and Photon classes (thanks to Raffaele Gerosa)
- added code from CMS to PileUpMerger and PileUpMergerPythia8
- added timing information to Calorimeter
- added new PileUpJetID version (thanks to Seth Senz)
- added Area 4-vector to jet class
- added PUPPI algorithm and RunPUPPI module
- added RecursiveTools package from fastjet contribs
- replaced N-subjettiness with an array in Jet class (same as in Candidate class)
- added Trimming, Pruning and SoftDrop to FastJetFinder
- added possibility to use DelphesPythia8 with LHE files
- added Pythia8 examples
- added JetFlavorAssociation module with Physics and Algorithmic definitions of the jet flavor
- added new jet flavor definitions to the BTagging module (available only when running DelphesPythia8 with LHE files)

3.2.0:
- moved code repository to GitHub (http://github.com/delphes/delphes)
- moved configuration files from examples to cards directory
- new event display, with automatic discovery of the object collections, navigation controls, and 3D geometry sketch (for more details, see WorkBook/EventDisplay)
- updated FastJet library to 3.1.0
- added zero suppression to Calorimeter and SimpleCalorimeter modules
- added SmearTowerCenter configuration parameter to Calorimeter and SimpleCalorimeter modules (#363)
- added FastJetGridMedianEstimator module (provides much faster pile-up subtraction based on a fixed grid eta-dependent average pile-up density computation)
- added AngularSmearing module (to smear track eta,phi)
- added PdgCodeFilter (to veto particle with given PID from collections)
- added IdentificationMap (allows to apply (mis)-identification)
- added Example4.C (provides an example on how to compute the jet energy scale)
- added examples (examples/ExternalFastJet) on how to run Delphes as a library with external FastJet installation
- updated card for FCC studies (cards/delphes_card_FCC_basic.tcl)
- added card for LHCb studies (cards/delphes_card_LHCb.tcl)
- made interface with Pythia 8 turned off by default
- adapted Isolation module to new energy-flow photons and neutral hadrons (#362)
- fixed jet mass calculation for anti-kt with "winner-take-all" (#355)
- fixed crashing of root2lhco when ROOT file doesn't contain all required branches (#340)
- added possibility to build Delphes with CMake (#313)

3.1.2:
- fixed smearing of (z,t) vertex distribution in the PileUpMerger module

3.1.1:
- adapted DelphesSTDHEP to the latest version of the STDHEP format introduced in MadGraph5_aMC@NLO 2.1.2

3.1.0:
  added Hector module (fast simulator for the transport of particles in beam lines)
- added N-subjettiness and N-jettiness (to identify boosted hadronically-decaying objects like electroweak bosons and top quarks)
- added SimpleCalorimeter module (to study effects of different granularity in ECAL and HCAL)
- added ImpactParameterSmearing (to smear transverse and longitudinal track impact parameter needed for track counting b-tagging)
- added TrackCountingBTagging module (for simple b-tagging algorithm based on counting tracks with large impact parameter)
- added basic card for FCC studies (examples/delphes_card_FCC_basic.tcl)

3.0.12:
- updated FastJet library to 3.0.6
- added smearing of (z,t) vertex distribution in the PileUpMerger module
- propagation time computed for every output collection
- added TimeSmearing module (for propagation time measurement)
- added PileUpJetId module (thanks to Seth Senz)

3.0.11:
- new energy-flow algorithm, optimized for better compatibility with pile-up subtraction
- added possibility of computing pile-up density in different eta regions via the RhoEtaRange parameter in FastJetFinder module
- implemented correct efficiency/resolution for high pt muons in CMS cards
- removed pile-up subtraction on missing energy
- added possibility to read re-weighting information from LHEF input files
- added UsePTSum and PTSumMax parameters to isolation module
- added possibility of specifying the shape of pile-up distribution (via the PileUpDistribution parameter in the PileUpMerger module)
- added pile-up Vertex collection to the output tree

3.0.10:
- new readers (DelphesProMC.cpp, DelphesProMC.py (#220), DelphesPythia8)
- new modules (EnergyScale, PileUpMergerPythia8, Weighter)
- new module parameters (absolute/relative isolation (#187), flat/poisson pile-up distribution)
- new global parameters (max number of events, skip events (#183), random seed (#202))
- new branches (pile-up event density rho, MC event weight)
- updated CMS and ALTAS detector cards (and added ATLAS pile-up detector card)
- calorimeter smearing is now performed according to a logNormal distribution
- improved particle-flow algorithm (#204)
- added calculation of particle propagation time in the tracker
- fixed tau-jet matching by only considering visible hadronic tau (#208)
- read masses from MC event file (#195, #201)
- bug fixes in DelphesCMSFWLite (#196)
- compilable analysis macro examples (#182)
- ability to read MC re-weighting information from LHE files

3.0.9:
- fixed reading of weighted STDHEP events (#181)
- fixed script building Delphes with CMSFWLite (#180)
- added more particles to StatusPidFilter (#179)

3.0.8:
- fixed treatment of units in HepMC format (#175)
- added Weight to HepMCEvent branch to store the event weight (#173)
- added Rho branch to store the rho energy density (#176)
- added random rotation of pile-up events around the z-axis

3.0.7:
- added separate make rule for the event display to fix the compilation problem for systems without OpenGL libraries (#168, #127)
- added Cloner module
- modified BTagging module (several BTagging bits can be stored for the same jet collection, see here)